| Year | Semester | Required Elective | Course ID | Course Name | Credits | Hours | Level | Note |
|---|---|---|---|---|---|---|---|---|
| 學年 | 學期 | 類別 | 課程編碼 | 課程名稱 | 學分 | 時數 | 階段別 | 備註 |
| 1 | 1 | ▲ | 5605001 | Thesis 論文 | 3.0 | 3 | 1 / 2 | |
| 1 | 1 | ▲ | 5605002 | Engineering Seminar 專題討論 | 1.0 | 2 | 1 / 2 | |
| 1 | 1 | ★ | 4005061 | Intellectual Property Rights 智慧財產權 | 3.0 | 3 | ||
| 1 | 1 | ★ | 4005067 | Technology R&D Case Study 科技研發個案研究 | 3.0 | 3 | ||
| 1 | 1 | ★ | 4006004 | Application of Intelligent Controller 智慧型控制應用 | 3.0 | 3 | ◎ | |
| 1 | 1 | ★ | 4006007 | Applied Statistics 應用統計學 | 3.0 | 3 | ||
| 1 | 1 | ★ | 4007009 | Theory and Applications of Ultrasonics 超音波原理與應用 | 3.0 | 3 | ◎ | |
| 1 | 1 | ★ | 4007013 | Laser Scanning Technology 雷射掃描技術 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605007 | Engineering of Films Coating 鍍膜工程 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605009 | Advanced IC Fabrication Process 先進半導體製程 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605010 | Packaging Technology 封裝技術 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605011 | Manufacturing System 製造系統 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605012 | Micro Electro-mechanical System 微機電系統 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605016 | Precision Machinery Dynamics and Control 精密機械控制 | 3.0 | 3 | ◎ | |
| 1 | 1 | ★ | 5605019 | Opto-electronic Methods in Precision Measurement 光電精密量測 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605020 | Surface Analysis Techniques and Application 表面分析技術及應用 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605022 | Mechanical Behaviors of Material 材料機械性質 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605023 | X-Ray Diffraction X光繞射學 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605026 | Engineering Analysis 工程分析 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605028 | Mechanical Vibrations 機械振動學 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605033 | Kinematic Synthesis of Mechanisms 機構運動合成 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605034 | Reliability Based Design 可靠度設計 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605037 | Fundamental Mechanics of Fluids 流體力學導論 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605040 | Convetive Heat Transfer 熱對流 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605041 | Mechanical System Design and Analysis 機械系統設計與分析 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605042 | Kinematic Geometry of Mechanisms 機構運動幾何學 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605046 | Experimental Design 實驗設計 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605047 | Precision Transmission Design 精密傳動設計 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605049 | Measurements in Manufacturing 製造量測學 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605054 | Research on Creative Design 創新設計研究 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605055 | Micro machining Technology 微加工技術 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605058 | Reverse Engineering Theory and Practice 逆向工程原理與實務 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605059 | English for Science and Technology 科技英文 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605060 | Special Topic on e-Manufacturing 數位化製造特論 | 3.0 | 3 | ◎ | |
| 1 | 1 | ★ | 5605061 | Advanced Mechanics of Materials 高等材料力學 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605068 | RFID Applications and Practices RFID應用實務 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605069 | Special Topic on plastic metal working 塑性加工特論 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605071 | Advanced Quality Management 高等品質管理 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605075 | Electron Microscopy 電子顯微鏡 | 3.0 | 3 | ◎ | |
| 1 | 1 | ★ | 5605080 | Special Topics on Manufacturing Technology (A) 製造科技特論(A) | 1.0 | 1 | ||
| 1 | 1 | ★ | 5605081 | Special Topics on Manufacturing Technology (B) 製造科技特論(B) | 2.0 | 2 | ||
| 1 | 1 | ★ | 5605082 | Special Topics on Manufacturing Technology (C) 製造科技特論(C) | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605084 | Advanced Properties of Materials and Related Practice 高等材料性質學與實習 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605085 | Creativity Engineering Design 創意性工程設計 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605089 | Lean Manufacturing Systems 精實製造系統 | 3.0 | 3 | ◎ | |
| 1 | 1 | ★ | 5605090 | Intelligent Production Technology 智能化生產技術 | 3.0 | 3 | ◎ | |
| 1 | 1 | ★ | 5605091 | Biofabrication 生醫製造學 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5606001 | Nanostructured Materials Processing 奈米材料與製程 | 3.0 | 3 | ◎ | |
| 1 | 1 | ★ | 5606002 | Design and Certification of Medical Devices 醫療器材研發與認證 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5606003 | Simulation for Semiconductor Device and Process Technology 半導體元件與製程模擬 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5606004 | Advanced Computer Aided Engineering Analysis 高等電腦輔助工程分析 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5606005 | Graduate On-Site Research 校外實務研究 | 3.0 | 18 | ◎ | |
| 1 | 2 | ▲ | 5605001 | Thesis 論文 | 3.0 | 3 | 2 / 2 | |
| 1 | 2 | ▲ | 5605002 | Engineering Seminar 專題討論 | 1.0 | 2 | 2 / 2 | |
| 1 | 2 | ★ | 4005016 | Nontraditional Manufacturing Methods and Controls 非傳統加工與控制 | 3.0 | 3 | ||
| 1 | 2 | ★ | 4005059 | Technological Innovation and R&D Management 技術創新與管理 | 3.0 | 3 | ||
| 1 | 2 | ★ | 4005076 | Prosthetic and Orthotic Biomechanics 植入物與矯具生物力學 | 3.0 | 3 | ||
| 1 | 2 | ★ | 4005100 | Taguchi Method on the Quality Design 田口式品質設計法 | 3.0 | 3 | ||
| 1 | 2 | ★ | 4005109 | Nuclear Reactor Eng 反應器工程 | 3.0 | 3 | ||
| 1 | 2 | ★ | 4005113 | Automatic Optical Inspection 自動光學檢測 | 3.0 | 3 | ◎ | |
| 1 | 2 | ★ | 4005200 | Fundamental and Clinical Laser Applications 雷射醫學的基礎與臨床應用 | 3.0 | 3 | ||
| 1 | 2 | ★ | 4007002 | Nanoparticale engineering and fabrication control 奈米顆粒工程與操控 | 3.0 | 3 | ||
| 1 | 2 | ★ | 4007006 | Special Topics of Nanotechnology (II) 奈米科技特論(二) | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605005 | Modern Manufacturing Technology 現代製造技術 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605006 | Computer Aided Design and Manufacturing 電腦輔助設計及製造 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605008 | Technology of Laser Material Processing 雷射加工技術 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605013 | Robotics 機器人學 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605014 | Design of Precision Machinery 精密機械設計 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605018 | Experimental Mechanics 實驗力學 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605024 | Kinetics in Manufacturing Process 製程動力學 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605027 | Finite Element Analysis 有限元素分析 | 3.0 | 3 | ◎ | |
| 1 | 2 | ★ | 5605029 | Theory and Practice of Structural Dynamic Testing 結構動態測試理論及實務 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605032 | Kinematic Analysis of Mechanisms 機構運動分析 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605035 | Engineerung Optimization Methods and Applications 工程最佳化及應用 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605038 | Thermal Modeling Lab. 熱模流及實驗 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605039 | Advanced Numerical Heat Transfer 高等數值熱傳 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605043 | Special topics of modern manufacturing technology 現代製造技術特論 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605048 | Analysis and control of Accuracy for precision Machinery 精密機械精度分析與控制 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605050 | Advanced Application of Sensor and Transducer Mechatronic 感測器研製及應用 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605052 | Numerical Heat Transfer and Control 數值熱傳與監控 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605053 | Advanced Computer-aided Mechanism Analysis 高等電腦輔助機構分析 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605056 | Non-Destructive Testing of Materials and Structures 材料與結構非破壞檢測 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605057 | Joining processes 材料接合技術 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605063 | Concurrent Engineering Technique Workshop 技術講座 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605064 | Principle and Process of TFT-LCD 液晶顯示器原理與製程 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605065 | Mechanical Engineering and Data Management 工程資料管理 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605066 | Optical Techniques of Fluids Measurements 光學流體量測技術 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605067 | Special Topic on Collaborative Systems for Global Manufacturing Operations 全球製造體系協同系統特論 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605073 | Mold engineering 模具工程 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605074 | Biomaterials 生醫材料 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605076 | Intelligent Manufacturing Systems 智慧化製造系統 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605077 | Automated Optical Inspection 自動化光學檢測 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605083 | Nuclear Power Reactor Safety 核能安全 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605086 | Environment, Safety and Health Engineerin 環安工程 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605087 | The technology of additive manufacturing 積層製造技術 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605088 | Principles and Applications of Predictive Diagnosis, Maintenance, and Monitoring 預測型診斷維護與監督 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5607001 | Research on Modern Manufacturing Technology 現代製造科技研究 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5607003 | Molecular Dynamics Simulation 分子動力學模擬 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5607008 | Internship of practical technology research and development 實務技術研發實習 | 1.0 | 40 |
|
1.Minimum of credits for graduation: 32 credits. 2.8 Credits of required courses: Including 6 credits for Master Thesis, 2 credits for Seminar; 24 credits for electives courses. 3.Mark “◎” represents category of eligible courses. Students need to choose and pass at least 3 such courses; to validate as graduation credits, the 3 courses must be from those offered by day division of Institute of Manufacturing Technology (IMT). 4.At most 3 credits can be accepted for “Concurrent Engineering Technique Workshop”. 5.Max number of credits allowed outside the department is 6 credits. For thesis requirements, students can take up to 9 credits after approval from advisor and department chair; classes from night division are also considered “outside the department”. 6.Students accepted after year 2010 into the College of Mechanical and Electrical Engineering need to fulfill English graduation requirements, more detailed information can be found at the institute’s website. 7.Number of elective credits for international students is 24 credits. English-taught courses offered by the departments in College of Electrical and Mechanical Engineering, College of Electrical Engineering and Computer Science or College of Engineering can be validated as IMT courses, after approval from advisor and department chair. 8.Each graduate student shall pass the minimum English proficiency requirement(s) for graduation, and shall all meet the criteria of the English proficiency tests set by the department (if any). Students may refer to the department websites for their English proficiency criteria set by each department. 9.The above regulations apply to freshman starting academic year 2020 and onwards. |
|
1.最低畢業學分：32學分。 2.必修8學分：含碩士論文6學分，專題討論2學分；選修24學分。 3.◎為專業必選課程，學生需至少修習通過3門；該3門課程需於本所日間部修習，始得承認為畢業必選課程。 4.技術講座最多承認3學分。 5.修習外所之課程，以6學分為原則，惟因論文需要者，經指導教授及系所主管同意後得修習9學分；跨學制課程等同外所。 6.機電學院各碩士班99學年度起入學學生訂有英文畢業門檻，詳細資訊如系所網頁所示。 7.本所外籍研究生選修為24學分，經指導教授及系所主管同意，選修機電學院或電資學院或工程學院之英文授課專業課程，得視同本系所開設之專業課程。 8.研究生畢業須符合校訂英語能力畢業門檻標準〈系所如另訂更高之英語能力畢業門檻標準，則須符合系所規定〉，英語能力畢業門檻相關規定請至系(所)網頁查詢。 9.本課程科目表適用於109學年度入學新生。 |