| Year | Semester | Required Elective | Course ID | Course Name | Credits | Hours | Level | Note |
|---|---|---|---|---|---|---|---|---|
| 學年 | 學期 | 類別 | 課程編碼 | 課程名稱 | 學分 | 時數 | 階段別 | 備註 |
| 1 | 1 | ▲ | AG05001 | Mechanical & Automation Technology Seminar 專題討論 | 1.0 | 2 | 1 / 2 | |
| 1 | 1 | ▲ | AG05002 | Thesis 論文 | 3.0 | 3 | 1 / 2 | |
| 1 | 1 | ★ | 4005013 | Vibration and Noise Control 振動與噪音控制 | 3.0 | 3 | ||
| 1 | 1 | ★ | 4005041 | Modern Control Theory 現代控制理論 | 3.0 | 3 | ||
| 1 | 1 | ★ | 4007009 | Theory and Applications of Ultrasonics 超音波原理與應用 | 3.0 | 3 | ||
| 1 | 1 | ★ | 4406124 | Intelligent Control 智慧型控制 | 3.0 | 3 | ||
| 1 | 1 | ★ | 4406129 | Personal Intelligent Rapid Transportation Vehicle and Operation System 個人化智慧型捷運車輛與運作系統 | 3.0 | 3 | ||
| 1 | 1 | ★ | 4505405 | Advanced Fluid Mechanics 高等流體力學 | 3.0 | 3 | ||
| 1 | 1 | ★ | 4505601 | HVAC System Technology 空調系統技術 | 3.0 | 3 | ||
| 1 | 1 | ★ | 4505602 | Clean room design 無塵無菌室設計 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605027 | Finite Element Analysis 有限元素分析 | 3.0 | 3 | ||
| 1 | 1 | ★ | 5605033 | Kinematic Synthesis of Mechanisms 機構運動合成 | 3.0 | 3 | ||
| 1 | 1 | ★ | 6105038 | Applied Technology of Digital Signal Processor 數位信號處理器應用技術 | 3.0 | 3 | ||
| 1 | 1 | ★ | 6105041 | Object-oriented Programming and its applications 物件導向程式設計與應用 | 3.0 | 3 | ||
| 1 | 1 | ★ | 6105055 | Digital Image Processing 數位影像處理 | 3.0 | 3 | ||
| 1 | 1 | ★ | 6105071 | Application and design of engineering software 工程軟體應用與設計 | 3.0 | 3 | ||
| 1 | 1 | ★ | 6607005 | Special Topics on Mechanical & Electric engineering (一) 機電科技特論(一) | 3.0 | 3 | ||
| 1 | 2 | ▲ | AG05001 | Mechanical & Automation Technology Seminar 專題討論 | 1.0 | 2 | 2 / 2 | |
| 1 | 2 | ▲ | AG05002 | Thesis 論文 | 3.0 | 3 | 2 / 2 | |
| 1 | 2 | ★ | 4005127 | Application of Organic Rankine Cycle 有機朗肯循環的應用 | 3.0 | 3 | ||
| 1 | 2 | ★ | 4006004 | Application of Intelligent Controller 智慧型控制應用 | 3.0 | 3 | ||
| 1 | 2 | ★ | 4006006 | CMOS Device Measurement and Reliability Engineering CMOS元件量測與可靠度工程 | 3.0 | 3 | ||
| 1 | 2 | ★ | 4406203 | Engineering Optimization Methods and Applications 工程最佳化與應用 | 3.0 | 3 | ||
| 1 | 2 | ★ | 4506201 | Heat exchanger analysis 熱交換器分析 | 3.0 | 3 | ||
| 1 | 2 | ★ | 4506202 | Advanced Engineering Thermodynamics 高等工程熱力學 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605051 | Mechatronics in Precision Machinery 精密機械 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605073 | Mold engineering 模具工程 | 3.0 | 3 | ||
| 1 | 2 | ★ | 5605088 | Principles and Applications of Predictive Diagnosis, Maintenance, and Monitoring 預測型診斷維護與監督 | 3.0 | 3 | ||
| 1 | 2 | ★ | 6105008 | Artificial Intelligence and Expert System 人工智慧及專家系統 | 3.0 | 3 | ||
| 1 | 2 | ★ | 6105017 | Robot Analysis and Design 機器人分析與設計 | 3.0 | 3 | ||
| 1 | 2 | ★ | 6105062 | Special Topics on T-S Fuzzy Model T-S模糊模式專論 | 3.0 | 3 | ||
| 1 | 2 | ★ | 6607006 | Special Topics on Mechanical & Electric engineering (二) 機電科技特論(二) | 3.0 | 3 |
|
1. Minimum total credits for graduation: 32 credits 2. 8 common required credits: Thesis (6 credits), Seminars (2 credits totally, 1 credit for each semester). 24 elective credits: The maximum credits from outside the college or different academic systems are 9. 3. The Seminars courses offered by Graduate Institute of Mechanical and Electrical Engineering (Ph. D. Program) are deemed equivalent to Seminars offered in this program. 4. Course credits offered by all graduate programs in the College of Mechanical and Electrical Engineering (CMEE) are deemed equivalent to elective credits offered in this program. 5. This table applies to those new students who enroll in Fall 2023 (112 Semester Year). |
|
1.最低畢業學分：32學分 2.必修8學分：含碩士論文6學分，專題討論2學分（分2學期修習）；選修24學分；修習外院課程或跨學制課程以9學分為採計上限。 3.本碩士專班學生修習機電科技研究所博士班之「專題討論」課程，學分亦予以承認。 4.本碩士專班學生修習機電學院各研究所碩士班課程視同本碩士專班學分。 5.本課程科目表適用112學年度入學新生。 |