| Year | Semester | Required Elective | Course ID | Course Name | Credits | Hours | Level | Note |
|---|---|---|---|---|---|---|---|---|
| 學年 | 學期 | 類別 | 課程編碼 | 課程名稱 | 學分 | 時數 | 階段別 | 備註 |
| 1 | 1 | ▲ | 4406001 | Engineering Seminar 專題討論 | 1.0 | 2 | 1 / 2 | |
| 1 | 1 | ▲ | 4406002 | Thesis 論文 | 3.0 | 3 | 1 / 2 | |
| 1 | 1 | ★ | 4406041 | Technical Paper Presentation 科技論文表達 | 3.0 | 3 | ||
| 1 | 1 | ★ | 4406101 | Control Theory 控制理論 | 3.0 | 3 | ||
| 1 | 1 | ★ | 4406119 | Advanced Vehicle Dynamics 高等車輛動力學 | 3.0 | 3 | ||
| 1 | 1 | ★ | 4406129 | Personal Intelligent Rapid Transportation Vehicle and Operation System 個人化智慧型捷運車輛與運作系統 | 3.0 | 3 | ||
| 1 | 1 | ★ | 4406146 | Hybrid Vehicle Powertrains 複合車輛動力系統 | 3.0 | 3 | ||
| 1 | 1 | ★ | 4505602 | Clean room design 無塵無菌室設計 | 3.0 | 3 | ||
| 1 | 1 | ★ | 6105038 | Applied Technology of Digital Signal Processor 數位信號處理器應用技術 | 3.0 | 3 | ||
| 1 | 2 | ▲ | 4406001 | Engineering Seminar 專題討論 | 1.0 | 2 | 2 / 2 | |
| 1 | 2 | ▲ | 4406002 | Thesis 論文 | 3.0 | 3 | 2 / 2 | |
| 1 | 2 | ★ | 4405031 | Digital Control Theory and Application 數位控制理論與應用 | 3.0 | 3 | ||
| 1 | 2 | ★ | 4406045 | Industry Strategic Planning and Technology Road-Mapping 產業策略規劃與技術布局 | 3.0 | 3 | ||
| 1 | 2 | ★ | 4406046 | Technology Development and its Industry Engineering Practice 新能源車輛技術發展與實務工程 | 3.0 | 3 | ||
| 1 | 2 | ★ | 4406112 | Finite Element Analysis 有限元素分析 | 3.0 | 3 | ||
| 1 | 2 | ★ | 4406122 | Intelligent Vehicle Dynamics and Control 智慧車輛動態與控制 | 3.0 | 3 | ||
| 1 | 2 | ★ | 4406124 | Intelligent Control 智慧型控制 | 3.0 | 3 | ||
| 1 | 2 | ★ | 4406203 | Engineering Optimization Methods and Applications 工程最佳化與應用 | 3.0 | 3 |
|
1. Minimum total credits for graduation: 32 credits (8 required + 24 elective) 2. 8 required credits: 6 thesis credits + 2 seminar credits 3. 24 elective credits: - students must earn a minimum 15 credits offered by IMPEV. - students can earn a maximum 9 credits from other inter-college graduate programs. 4. equivalent credits: - seminar credits offered by Graduate Institute of Mechanical and Electrical Engineering (Ph. D. Program) are deemed equivalent to seminar credits offered in this program. - course credits offered by all graduate programs in College of Mechanical and Electrical Engineering (CMEE) are deemed equivalent to elective credits offered in this program. 5. This list of credits for Graduation is applicable to students enrolled in the academic year 2020. |
|
1.最低畢業學分：32學分。 2.必修8學分：含碩士論文6學分，專題討論2學分；選修24學分。 3.至少需修習本專班選修課程5門；跨院選修者，本專班承認之畢業學分最多不得超過9學分。 4.修習機電科技研究所博士班之「專題討論」課程，學分可被承認採計；修習機電學院各研究所碩士班課程之學分亦可被承認採計。 5.本課程科目表適用於109學年度入學新生。 |