查詢教學大綱與進度

教學大綱與進度

課程基本資料：

學年期課號課程名稱階段學分時數修教師班級人撤備註

112-1 321152 電腦輔助能源與熱流科學分析 1 3.0 3 ★ 施陽正能源所
能源與車輛外生專班 22 0 能源所和能源與車輛外生班合開

學年期	課號	課程名稱	階段	學分	時數	修	教師	班級	人	撤	備註
112-1	321152	電腦輔助能源與熱流科學分析	1	3.0	3	★	施陽正	能源所能源與車輛外生專班	22	0	能源所和能源與車輛外生班合開

教學大綱與進度：

教師姓名施陽正　教師諮商時間(Office Hours)

Email f10958@ntut.edu.tw

最後更新時間 2023-05-31 14:19:05

課程大綱 This course is suitable for graduate students who have taken engineering mathematics and basic thermofluid courses. The main content of the lecture is the application of Matlab and CFD package software to analyze related issues in the field of energy and thermofluid science, with emphasis on case studies. The course content mainly includes the use of numerical analysis to analyze the boundary layer problems, finite difference method to solve steady-state and transient heat conduction, and two-dimensional forced-driven flow problems. Case studies include the indoor airflow movement, cleanroom airflow distribution, heat exchanger performance analysis, analysis of ice storage system, electronic heat dissipation, and hydrogen energy system, etc.

課程進度 Week Class Content: 1 (1) Course outline (2) Ch1-Introduction to CFD (3) Ch2-Governing Equations (I) 2 (1) Ch2-Governing Equations (II) (2) Ch3-Types of Governing Equations (3) Ch4-Basics of Finite Difference (4) Ch5-Methods of Solving Sets of Algebraic Equations (I) HW#1 Tut1_Mixing Tee 3 (1) Ch5-Methods of Solving Sets of Algebraic Equations (II) (2) Ch6-Introduction to Finite Volume Method HW#2 Tut2_Mixing Elbow 4 Solving CFD with ANSYS FLUENT (I) Tut5_Indoor airflow 5 National Holiday 6 (1) Ch7-Cell zones and Boundary Conditions (2) Ch8-Meshing and Postprocessing (3) Ch9-V&V in CFD and Heat Transfer (I) HW#3 Tut4_Turbulent Pipe Flow 7 Ch9-V&V in CFD and Heat Transfer (II) 8 Ch10-Heat Transfer HW#4 Tut3_Laminar Pipe Flow and V&V 9 Solving CFD with ANSYS FLUENT (II) Tut6_Lid-Driven Flow HW#5 Tut10_S2S Radiation Model 10 Ch11-Turbulence (I) 11 Ch11-Turbulence (II) 12 (1) Ch12-UDF (2) FVM for Diffusion Problems (3) FVM for Convection-Diffusion Problems (I) 13 (1) FVM for Convection-Diffusion Problems (II) (2) Calculation of the Flow Field 14 Solving CFD with ANSYS FLUENT (IV) Tut8_Axial fan 15 Optimization-Taguchi method and Grey Relational Method (I) 16 Optimization-Taguchi method and Grey Relational Method (II) 17 National Holiday 18 Final report

評量方式與標準 Grading Policy： Homework and Attendance 40%, Final Exam 30%, Final Report(30%) Preliminary: With the ability to use ANSYS FLUENT

使用教材、參考書目或其他 【遵守智慧財產權觀念，請使用正版教科書，不得使用非法影印教科書】

使用外文原文書：是
Textbook： Class note made by instructor Reference book： 1. Fox, R.W., Pritchard, P.J. and McDonald, A.T., “Introduction toFluid Mechanics”, 7th ed., 2010, John Wiley & Sons, Inc. 2. Kundu, P. K. and Cohen, I.M. “Fluid Mechanics”, 2008 3. White, F.M., “Viscous Fluid Flow”, 3rd ed., 2006. 4. JiJi, L.M., “Heat Convection”, Springer, 2006. 5. Wong, K.F., “Intermediate Heat Transfer”, Marcel Dekker, Inc, 2003. 6. Incropera, F.P., Dewitt, D.P., Bergman, T.L., and Lavine, A.S., “Introduction to Heat Transfer”, 5th ed., 2007 7. Cengel, Y.A., “Heat and Mass Transfer: A Practical Approach”, 3rd ed., 2006. 8. Versteeg, H.K, W. Malalasekera (2007), An Introduction to Computational Fluid Dynamics---The Finite Volume Method. (www.amazon.com), 9. Patankar, S.V. (1980), Numerical Heat Transfer and Fluid Flow. 10. Anderson, D.A., J.C. Tannehill, R.H. Pletcher (1984,1997), Computational Fluid Mechanics and Heat Transfer, 1984 ed. , 1997ed. 11. Cebeci, T., Shao, J.P., Kafyeke, T., and Laurendeau, E., “Computational Fluid Dynamics for Engineers”, 2005. 12. Tu, J., Liu, C., and Yeoh, G.H., “Computational Fluid Dynamics: A Practical Approach”, 2008.

課程諮詢管道 f10958@ntut.edu.tw

課程對應SDGs指標

備註

教師姓名	施陽正　教師諮商時間(Office Hours)
Email	f10958@ntut.edu.tw
最後更新時間	2023-05-31 14:19:05
課程大綱	This course is suitable for graduate students who have taken engineering mathematics and basic thermofluid courses. The main content of the lecture is the application of Matlab and CFD package software to analyze related issues in the field of energy and thermofluid science, with emphasis on case studies. The course content mainly includes the use of numerical analysis to analyze the boundary layer problems, finite difference method to solve steady-state and transient heat conduction, and two-dimensional forced-driven flow problems. Case studies include the indoor airflow movement, cleanroom airflow distribution, heat exchanger performance analysis, analysis of ice storage system, electronic heat dissipation, and hydrogen energy system, etc.
課程進度	Week Class Content: 1 (1) Course outline (2) Ch1-Introduction to CFD (3) Ch2-Governing Equations (I) 2 (1) Ch2-Governing Equations (II) (2) Ch3-Types of Governing Equations (3) Ch4-Basics of Finite Difference (4) Ch5-Methods of Solving Sets of Algebraic Equations (I) HW#1 Tut1_Mixing Tee 3 (1) Ch5-Methods of Solving Sets of Algebraic Equations (II) (2) Ch6-Introduction to Finite Volume Method HW#2 Tut2_Mixing Elbow 4 Solving CFD with ANSYS FLUENT (I) Tut5_Indoor airflow 5 National Holiday 6 (1) Ch7-Cell zones and Boundary Conditions (2) Ch8-Meshing and Postprocessing (3) Ch9-V&V in CFD and Heat Transfer (I) HW#3 Tut4_Turbulent Pipe Flow 7 Ch9-V&V in CFD and Heat Transfer (II) 8 Ch10-Heat Transfer HW#4 Tut3_Laminar Pipe Flow and V&V 9 Solving CFD with ANSYS FLUENT (II) Tut6_Lid-Driven Flow HW#5 Tut10_S2S Radiation Model 10 Ch11-Turbulence (I) 11 Ch11-Turbulence (II) 12 (1) Ch12-UDF (2) FVM for Diffusion Problems (3) FVM for Convection-Diffusion Problems (I) 13 (1) FVM for Convection-Diffusion Problems (II) (2) Calculation of the Flow Field 14 Solving CFD with ANSYS FLUENT (IV) Tut8_Axial fan 15 Optimization-Taguchi method and Grey Relational Method (I) 16 Optimization-Taguchi method and Grey Relational Method (II) 17 National Holiday 18 Final report
評量方式與標準	Grading Policy： Homework and Attendance 40%, Final Exam 30%, Final Report(30%) Preliminary: With the ability to use ANSYS FLUENT
使用教材、參考書目或其他	【遵守智慧財產權觀念，請使用正版教科書，不得使用非法影印教科書】使用外文原文書：是 Textbook： Class note made by instructor Reference book： 1. Fox, R.W., Pritchard, P.J. and McDonald, A.T., “Introduction toFluid Mechanics”, 7th ed., 2010, John Wiley & Sons, Inc. 2. Kundu, P. K. and Cohen, I.M. “Fluid Mechanics”, 2008 3. White, F.M., “Viscous Fluid Flow”, 3rd ed., 2006. 4. JiJi, L.M., “Heat Convection”, Springer, 2006. 5. Wong, K.F., “Intermediate Heat Transfer”, Marcel Dekker, Inc, 2003. 6. Incropera, F.P., Dewitt, D.P., Bergman, T.L., and Lavine, A.S., “Introduction to Heat Transfer”, 5th ed., 2007 7. Cengel, Y.A., “Heat and Mass Transfer: A Practical Approach”, 3rd ed., 2006. 8. Versteeg, H.K, W. Malalasekera (2007), An Introduction to Computational Fluid Dynamics---The Finite Volume Method. (www.amazon.com), 9. Patankar, S.V. (1980), Numerical Heat Transfer and Fluid Flow. 10. Anderson, D.A., J.C. Tannehill, R.H. Pletcher (1984,1997), Computational Fluid Mechanics and Heat Transfer, 1984 ed. , 1997ed. 11. Cebeci, T., Shao, J.P., Kafyeke, T., and Laurendeau, E., “Computational Fluid Dynamics for Engineers”, 2005. 12. Tu, J., Liu, C., and Yeoh, G.H., “Computational Fluid Dynamics: A Practical Approach”, 2008.
課程諮詢管道	f10958@ntut.edu.tw
課程對應SDGs指標
備註