查詢教學大綱與進度

教學大綱與進度

課程基本資料：

學年期課號課程名稱階段學分時數修教師班級人撤備註

113-2 344450 節能車輛模擬與嵌入式系統 1 3.0 3 ★ 吳建 職車輛所 9 1 綜科610

學年期	課號	課程名稱	階段	學分	時數	修	教師	班級	人	撤	備註
113-2	344450	節能車輛模擬與嵌入式系統	1	3.0	3	★	吳建	職車輛所	9	1	綜科610

教學大綱與進度：

教師姓名吳建　教師諮商時間(Office Hours)

Email chwu@ntut.edu.tw

最後更新時間 2024-12-16 12:33:33

課程大綱建立節能車輛模擬平台，用以評估主系統與次系統之性能與響應關係，並以行車型態為例，分析能量管理系統、引擎、馬達、燃料電池、變速箱與不同儲能電池彼此之特性影響，進一步完成整車調校與控制策略之修正；介紹節能車輛中所使用數學模型與相關理論，進一步連結到學生在實務時會遇到的實際案例，解釋所觀察到的物理反應現象。 Establish the energy-saving vehicle simulation platforms are developed in this study to evaluate performance and response between main system and subsystems. The driving cycles are adopted as an example and characteristics among energy management system (EMS), engine, motor, fuel cell, automated manual transmission (AMT) and Energy storage batteries are analyzed for further calibration and modification of control strategy. This course aims at teaching key mathematical models and related theories used in energy-saving vehicles, further links to actual cases that students will encounter on the scene, and explains the physical reaction phenomena observed.

課程進度 1. Course Introduction and Matlab/Simulink Explanation 2. Introduction to Vehicle Dynamics and Software Establishment 3. Introduction to Transmission Model and Software Establishment 4. Introduction to Engine Model and Software Establishment 5. Introduction to Driving Pattern, Driver Model and Software Establishment 6. Integration and Analysis for Simulation Platform of the Internal Combustion Engine Vehicle 7. Introduction to Motor Model and Software Establishment 8. Introduction to Energy Storage Battery Model and Software Establishment 9. Midterm Exam 10. Integration and Analysis of the Electric Vehicle Simulation Platform 11. Introduction to Energy Management System Model introduction and Software Establishment 12. Integration and Analysis of the Hybrid Vehicle Simulation Platform 13. Fuel Cell Systems (1) 14. Fuel Cell Systems (2) 15. Integration and Analysis for Simulation Platform of the Hybrid Energy Storag Vehicle 16. Introduction to Vehicle Simulation Platform and Hardware Embedded System(1) 17. Introduction to Vehicle Simulation Platform and Hardware Embedded System(2) 18. Final Report

評量方式與標準 General Performance: 20% Computer-based Midterm Exam: 40% Final Report: 40%

使用教材、參考書目或其他 【遵守智慧財產權觀念，請使用正版教科書，不得使用非法影印教科書】

使用外文原文書：否
None

課程諮詢管道 (1) Tel: 02-27712171#3617
(2) Research Office: 526-3, General Science Building
(3) email: chwu@ntut.edu.tw

延伸教學與資源

課程對應SDGs指標 SDG1：消除貧窮（No Poverty）
SDG3：良好健康和福祉（Good Health and Well-being）
SDG4：優質教育（Quality Education）
SDG7：可負擔的潔淨能源（Affordable and Clean Energy）
SDG8：尊嚴就業與經濟發展（Decent Work and Economic Growth）
SDG9：產業創新與基礎設施（Industry, Innovation and Infrastructure）

課程是否導入AI

備註
Google Meet：https://meet.google.com/gtm-ueao-pfr
In response to the implementation of online teaching in the 17th and 18th weeks, please check the NTUT i-campus teaching course video

教師姓名	吳建　教師諮商時間(Office Hours)
Email	chwu@ntut.edu.tw
最後更新時間	2024-12-16 12:33:33
課程大綱	建立節能車輛模擬平台，用以評估主系統與次系統之性能與響應關係，並以行車型態為例，分析能量管理系統、引擎、馬達、燃料電池、變速箱與不同儲能電池彼此之特性影響，進一步完成整車調校與控制策略之修正；介紹節能車輛中所使用數學模型與相關理論，進一步連結到學生在實務時會遇到的實際案例，解釋所觀察到的物理反應現象。 Establish the energy-saving vehicle simulation platforms are developed in this study to evaluate performance and response between main system and subsystems. The driving cycles are adopted as an example and characteristics among energy management system (EMS), engine, motor, fuel cell, automated manual transmission (AMT) and Energy storage batteries are analyzed for further calibration and modification of control strategy. This course aims at teaching key mathematical models and related theories used in energy-saving vehicles, further links to actual cases that students will encounter on the scene, and explains the physical reaction phenomena observed.
課程進度	1. Course Introduction and Matlab/Simulink Explanation 2. Introduction to Vehicle Dynamics and Software Establishment 3. Introduction to Transmission Model and Software Establishment 4. Introduction to Engine Model and Software Establishment 5. Introduction to Driving Pattern, Driver Model and Software Establishment 6. Integration and Analysis for Simulation Platform of the Internal Combustion Engine Vehicle 7. Introduction to Motor Model and Software Establishment 8. Introduction to Energy Storage Battery Model and Software Establishment 9. Midterm Exam 10. Integration and Analysis of the Electric Vehicle Simulation Platform 11. Introduction to Energy Management System Model introduction and Software Establishment 12. Integration and Analysis of the Hybrid Vehicle Simulation Platform 13. Fuel Cell Systems (1) 14. Fuel Cell Systems (2) 15. Integration and Analysis for Simulation Platform of the Hybrid Energy Storag Vehicle 16. Introduction to Vehicle Simulation Platform and Hardware Embedded System(1) 17. Introduction to Vehicle Simulation Platform and Hardware Embedded System(2) 18. Final Report
評量方式與標準	General Performance: 20% Computer-based Midterm Exam: 40% Final Report: 40%
使用教材、參考書目或其他	【遵守智慧財產權觀念，請使用正版教科書，不得使用非法影印教科書】使用外文原文書：否 None
課程諮詢管道	(1) Tel: 02-27712171#3617 (2) Research Office: 526-3, General Science Building (3) email: chwu@ntut.edu.tw
延伸教學與資源
課程對應SDGs指標	SDG1：消除貧窮（No Poverty） SDG3：良好健康和福祉（Good Health and Well-being） SDG4：優質教育（Quality Education） SDG7：可負擔的潔淨能源（Affordable and Clean Energy） SDG8：尊嚴就業與經濟發展（Decent Work and Economic Growth） SDG9：產業創新與基礎設施（Industry, Innovation and Infrastructure）
課程是否導入AI
備註	Google Meet：https://meet.google.com/gtm-ueao-pfr In response to the implementation of online teaching in the 17th and 18th weeks, please check the NTUT i-campus teaching course video