課程編碼
Course Code
中文課程名稱
Course Name (Chinese)
英文課程名稱
Course Name (English)
總學分數
Credits
總時數
Hours
6504601 矽光子元件設計與製造 Silicon Photonic Device Design and Fabrication 3.0 3
中文概述
Chinese Description
本課程介紹矽光子元件從設計、佈局、製程到量測驗證之完整流程,回應人工智慧資料中心與共同封裝光學(Co-Packaged Optics, CPO)對高速、低功耗光互連之需求。內容涵蓋絕緣層上覆矽(Silicon-on-Insulator, SOI)光波導理論與模態分析;被動元件(波導、多模干涉耦合器、方向耦合器、微環共振腔、光柵耦合器與端面耦合器)及主動元件(熱光相位調制器、載子空乏式調制器、鍺光偵測器)之原理與設計。學生以模擬軟體進行元件設計與最佳化,依製程設計套件(Process Design Kit, PDK)完成光罩佈局,並學習微影、蝕刻、薄膜沉積等關鍵製程與多專案晶圓(Multi-Project Wafer, MPW)下線流程;課程最後實作晶圓級光纖耦合、插入損耗與頻譜量測及數據分析。修課學生以分組專題完成一項矽光子元件之設計、佈局與量測報告,培養矽光子與CPO產業所需之設計與驗證實務能力。
英文概述
English Description
This course covers the complete workflow of silicon photonic devices, from design and layout to fabrication and measurement, in response to the growing demand for high-speed, low-power optical interconnects in AI data centers and co-packaged optics (CPO). Topics include silicon-on-insulator (SOI) waveguide theory and mode analysis, and the principles and design of passive devices (waveguides, multimode interference couplers, directional couplers, microring resonators, grating couplers and edge couplers) and active devices (thermo-optic phase shifters, carrier-depletion modulators and germanium photodetectors). Students use simulation tools to design and optimize devices, complete mask layouts based on a process design kit (PDK), and learn key fabrication processes, including lithography, etching and thin-film deposition, as well as the multi-project wafer (MPW) tape-out flow. The course concludes with hands-on wafer-level fiber coupling, insertion loss and spectral measurements, and da
核心能力指標 2.設計與執行光電工程實驗,以及分析與解釋數據之能力。
3.執行光電工程實務所需技術、技巧及使用現代工具之能力。
4.設計工程系統、元件或製程之能力。
6.發掘、分析、應用研究成果及兼顧永續發展,以解決複雜且整合性工程問題的能力。

備註: