課 程 概 述
Course Description

課程編碼
Course Code
中文課程名稱
Course Name (Chinese)
英文課程名稱
Course Name (English)
總學分數
Credits
總時數
Hours
3604132 電路設計、測試、與除錯 Circuit Design, Test and Debug 3.0 3
中文概述
Chinese Description
這是一門設計為 "軟硬體合成的電子實習" 課程。對於一個電路的實作程序如下: (1). 首先使用C/C++來計算和設定,電路的零件值。 (2). 再使用 Spice simulator,對該電路來做諸如 DC operating point、Transient Analysis、AC Analysis、DC Sweep、DC Transfer、Noise、FFT、Spectrum Analysis、等必要的分柝,以證明該電路的規格與可行性。 (3). 將電路佈局、並銲接到實驗板上。 (4). 使用 PC/Analog Discovery Module 對實驗板上的電路來做測試和除錯,並且跟Spice 所獲得的數據來作比較。 本課程的設計除了每週 3 小時的教室講解、示範和討論外,並提供每位同學一個Analog Discovery和實作教材,以供同學課外每週約 8~12 小時的實作之需。全學期約 12 個項目,除了必須完成有關實作外之紙上作業,還有期中及期末測驗,以檢定學習之成效。
英文概述
English Description
This is a design for the "integration implementation" course (iLAB). The course consists of the following: (1) Use C / C + + to calculate and set the value of circuit components; (2) Use SPICE to perform DC operating point, Transient Analysis, AC Analysis, DC Sweep, DC Transfer, Noise, FFT Spectrum Analysis, and other point analysis to show that the circuit is feasibile; (3) Layout the circuit and solder to the prototype board; (4) Use PC / Analog Discovery Module on the circuit board to perform experiments to test and debug and compare results obtained via SPICE for comparison. The course is designed in addition to three hours of weekly lecture, recitation, demonstrations and discussions, to provide each student an Analog Discovery and teaching materials for students outside the classroom requiring approximately 8 to12 hours per week outside the classroom. Approximately 12 projects in addition to homework as well as midterm and final exam to test aptitude and covered material wi

備註:

  1. 本資料係由本校各教學單位、教務處課務組、進修部教務組、進修學院教務組及計網中心所共同提供!
  2. 本資料僅供參考,正式資料仍以教務處、進修部、進修學院所公佈之書面資料為準。