Course Syllabus

Course Information：

Year-Semester Course Number Course Name Phase Credits Hours Required/Elective Instructor Class Student NO. Withdraw Note

Fall Semester
Year 2025 352662 Measurement and Signal Processing 1 3.0 3 ★ MA KUEN WAI 4ME2A
4ME2B 71 19 機械大二合開

Year-Semester	Course Number	Course Name	Phase	Credits	Hours	Required/Elective	Instructor	Class	Student NO.	Withdraw	Note
Fall Semester Year 2025	352662	Measurement and Signal Processing	1	3.0	3	★	MA KUEN WAI	4ME2A 4ME2B	71	19	機械大二合開

Course Plan：

Instructor MA KUEN WAI　Office Hours

Email kwma@ntut.edu.tw

Last Updated 2025-08-29 13:52:31

Course Objective 先修課程：負責教授同意。量測原理及訊號處理的一般方法（含放大電路、動態響應及頻譜分析），說明各種感測器之原理、規格、結構圖、應用的場合及其訊號處理（含速度、位移、加速度、力量、扭矩、功率、壓力、流量、溫度、化學組成、濕度、濃度、照度、電流、電壓、磁通量、磁場強度、各型感測開關等），感測器與電腦之連線。 Measurement Principles, General Methods for Signal Processing (Amplified Circuits, Dynamic Response, and Frequency spectrum Analysis), Discussion of Principle, Specification, Structure, Occasion and Location of Application of a Variety of Sensors for Measuring Physical Quantities,such as Displacement, Velocity, Acceleration, Force, Torque, Power,Pressure, Flow Rate, Temperature, Chemical Composition, Humidity,Density, Luminosity, Current, Voltage, Magnetic Flux, Magnetic Intensity , a Variety of Sensing Switch, etc.

Course Schedule Week Topic 1 Course introduction & measurement principles and importance 2 Fundamental concepts of signal processing 3 Physical quantities 4 Standards and calibration 5 Principles and specification of sensors (I) 6 Principles and specification of sensors (II) 7 Data acquisition systems (I) 8 Data acquisition systems (II) 9 Mid-term exam 10 Measurement techniques (I, displacement, position, and velocity, etc.) 11 Measurement techniques (II, torque, power, and pressure, etc.) 12 Measurement techniques (III, flow rate, temperature, etc.) 13 Measurement techniques (IV, chemical, electrical, magnetic properties, etc.) 14 Software for signal processing 15 Signal analysis 16 Student seminar presentation (I) 17 Student seminar presentation (II) 18 Final exam

Evaluation and grading policy Subject Mark = Attendance 15% + Mid-term exam 30% + Group report & seminar presentation 25% + Final exam 30%

Materials All right reserved. Do not reproduce without permission.

Foreign-language textbooks:No
使用自編教材 / Use of self-made materials

The access to curricular consultation Email: kwma@ntut.edu.tw; Tel: 02-27712171 #2074

Expanding teaching and resources

The course corresponds to the SDGs 無（None）

Does the course incorporate AI ● 無（None）

Note
　

Instructor	MA KUEN WAI　Office Hours
Email	kwma@ntut.edu.tw
Last Updated	2025-08-29 13:52:31
Course Objective	先修課程：負責教授同意。量測原理及訊號處理的一般方法（含放大電路、動態響應及頻譜分析），說明各種感測器之原理、規格、結構圖、應用的場合及其訊號處理（含速度、位移、加速度、力量、扭矩、功率、壓力、流量、溫度、化學組成、濕度、濃度、照度、電流、電壓、磁通量、磁場強度、各型感測開關等），感測器與電腦之連線。 Measurement Principles, General Methods for Signal Processing (Amplified Circuits, Dynamic Response, and Frequency spectrum Analysis), Discussion of Principle, Specification, Structure, Occasion and Location of Application of a Variety of Sensors for Measuring Physical Quantities,such as Displacement, Velocity, Acceleration, Force, Torque, Power,Pressure, Flow Rate, Temperature, Chemical Composition, Humidity,Density, Luminosity, Current, Voltage, Magnetic Flux, Magnetic Intensity , a Variety of Sensing Switch, etc.
Course Schedule	Week Topic 1 Course introduction & measurement principles and importance 2 Fundamental concepts of signal processing 3 Physical quantities 4 Standards and calibration 5 Principles and specification of sensors (I) 6 Principles and specification of sensors (II) 7 Data acquisition systems (I) 8 Data acquisition systems (II) 9 Mid-term exam 10 Measurement techniques (I, displacement, position, and velocity, etc.) 11 Measurement techniques (II, torque, power, and pressure, etc.) 12 Measurement techniques (III, flow rate, temperature, etc.) 13 Measurement techniques (IV, chemical, electrical, magnetic properties, etc.) 14 Software for signal processing 15 Signal analysis 16 Student seminar presentation (I) 17 Student seminar presentation (II) 18 Final exam
Evaluation and grading policy	Subject Mark = Attendance 15% + Mid-term exam 30% + Group report & seminar presentation 25% + Final exam 30%
Materials	All right reserved. Do not reproduce without permission. Foreign-language textbooks:No 使用自編教材 / Use of self-made materials
The access to curricular consultation	Email: kwma@ntut.edu.tw; Tel: 02-27712171 #2074
Expanding teaching and resources
The course corresponds to the SDGs	無（None）
Does the course incorporate AI	● 無（None）
Note