Course Syllabus

Course Information：

Year-Semester Course Number Course Name Phase Credits Hours Required/Elective Instructor Class Student NO. Withdraw Note

Spring Semester
Year 2026 356236 Computer Aided Heat Flow Analysis 1 3.0 3 ★ Juan,Yu-Hsuan GME 24 0 甲組選修，綜科610

Year-Semester	Course Number	Course Name	Phase	Credits	Hours	Required/Elective	Instructor	Class	Student NO.	Withdraw	Note
Spring Semester Year 2026	356236	Computer Aided Heat Flow Analysis	1	3.0	3	★	Juan,Yu-Hsuan	GME	24	0	甲組選修，綜科610

Course Plan：

Instructor Juan,Yu-Hsuan　Office Hours

Email yhjuan@ntut.edu.tw

Last Updated 2025-12-18 04:23:50

Course Objective 使用partakar code ，Ansys ， Mold flow ， C Mold ， Phoneic 等其中軟體，來計算一維穩態，一維暫態，二維穩態，二維暫態，之熱傳導問題，邊界層之偶合性流場問題，燃燒場之數值計算，電子熱傳相關系統。 By using software of Partankar Code, Ansys, Mold flow, C mold, and Phoneics parckage to compute the one dimension steady, are dimension unsteady, two dimension steady , two dimension unsteady heat conduction problems, boundary layer compling flow's problems,combustion calculations, electronic heat transfer problems.

Course Schedule 第1週課程大綱/作業繳交規定/成績核定第2週介紹CFD/統御方程式/有限體積法第3週 Workbench操作與概念介紹第4週 Ansys前處理於CFD應用與操作第5週網格生成/網格驗證第6週網格種類及品質介紹第7週流場設定/流場與模組設定第8週 CFD實作及討論/內流場模擬實作第9週期中測驗第10週 CFD實作及討論/風扇模擬分析第11週統御方程式/控制方程/求解器第12週紊流模型介紹第13週 UDF/後處理設定教學第14週 CFD實作及討論/熱傳模擬分析第15週 CFD實作及討論/ MRF旋轉機械流場變化模擬第16週實務期末報告第17週線上教學-實務期末報告第18週線上教學-實務期末報告

Evaluation and grading policy 出席、課堂討論及作業40% 期中考30% 實務期末報告30%

Materials All right reserved. Do not reproduce without permission.

Foreign-language textbooks:Yes
1. White, F.M., “Viscous Fluid Flow”, 3rd ed., 2006. 2. JiJi, L.M., “Heat Convection”, Springer, 2006. (巨擘書局) 3. Wong, K.F., “Intermediate Heat Transfer”, Marcel Dekker, Inc, 2003. (亞勃克國際圖書) 4. Incropera, F.P., Dewitt, D.P., Bergman, T.L., and Lavine, A.S.,“Introduction to Heat 第1週 Transfer”, 5th ed., 2007 (東華書局). 5. Cengel, Y.A., “Heat and Mass Transfer: A Practical Approach”, 3 rd ed., 2006. (滄海書局) 6. Versteeg, H.K, W. Malalasekera (2007), An Introduction to Computational Fluid Dynamics---The Finite Volume Method. (www.amazon.com), (巨擘) 7. Cebeci, T., Shao, J.P., Kafyeke, T., and Laurendeau, E., “Computational Fluid Dynamics for Engineers”, 2005. (電子書) 8. Tu, J., Liu, C., and Yeoh, G.H., “ Computational Fluid Dynamics: A Practical Approach”, 2008. (電子書) 9. Franke, Jorg, et al. "The COST 732 Best Practice Guideline for CFD simulation of flows in the urban environment: a summary." International Journal of Environment and Pollution 44.1-4 (2011): 419-427. 10. Tominaga, Yoshihide, et al. "AIJ guidelines for practical applications of CFD to pedestrian wind environment around buildings." Journal of wind engineering and industrial aerodynamics 96.10-11 (2008): 1749-1761.

The access to curricular consultation 課程諮詢請來信
阮于軒助理教授
yhjuan@ntut.edu.tw
Line課程群組
02-27712171 #2065

Expanding teaching and resources

The course corresponds to the SDGs SDG4：優質教育（Quality Education）
SDG7：可負擔的潔淨能源（Affordable and Clean Energy）
SDG9：產業創新與基礎設施（Industry, Innovation and Infrastructure）
SDG11：永續城市與社區（Sustainable Cities and Communities）

Does the course incorporate AI ● 鼓勵學生使用生成式AI工具（Encourage students to use generative AI tools）

Note
SDGs 4, 7, 11
本學期上課教室位於綜合科館610電腦教室

Instructor	Juan,Yu-Hsuan　Office Hours
Email	yhjuan@ntut.edu.tw
Last Updated	2025-12-18 04:23:50
Course Objective	使用partakar code ，Ansys ， Mold flow ， C Mold ， Phoneic 等其中軟體，來計算一維穩態，一維暫態，二維穩態，二維暫態，之熱傳導問題，邊界層之偶合性流場問題，燃燒場之數值計算，電子熱傳相關系統。 By using software of Partankar Code, Ansys, Mold flow, C mold, and Phoneics parckage to compute the one dimension steady, are dimension unsteady, two dimension steady , two dimension unsteady heat conduction problems, boundary layer compling flow's problems,combustion calculations, electronic heat transfer problems.
Course Schedule	第1週課程大綱/作業繳交規定/成績核定第2週介紹CFD/統御方程式/有限體積法第3週 Workbench操作與概念介紹第4週 Ansys前處理於CFD應用與操作第5週網格生成/網格驗證第6週網格種類及品質介紹第7週流場設定/流場與模組設定第8週 CFD實作及討論/內流場模擬實作第9週期中測驗第10週 CFD實作及討論/風扇模擬分析第11週統御方程式/控制方程/求解器第12週紊流模型介紹第13週 UDF/後處理設定教學第14週 CFD實作及討論/熱傳模擬分析第15週 CFD實作及討論/ MRF旋轉機械流場變化模擬第16週實務期末報告第17週線上教學-實務期末報告第18週線上教學-實務期末報告
Evaluation and grading policy	出席、課堂討論及作業40% 期中考30% 實務期末報告30%
Materials	All right reserved. Do not reproduce without permission. Foreign-language textbooks:Yes 1. White, F.M., “Viscous Fluid Flow”, 3rd ed., 2006. 2. JiJi, L.M., “Heat Convection”, Springer, 2006. (巨擘書局) 3. Wong, K.F., “Intermediate Heat Transfer”, Marcel Dekker, Inc, 2003. (亞勃克國際圖書) 4. Incropera, F.P., Dewitt, D.P., Bergman, T.L., and Lavine, A.S.,“Introduction to Heat 第1週 Transfer”, 5th ed., 2007 (東華書局). 5. Cengel, Y.A., “Heat and Mass Transfer: A Practical Approach”, 3 rd ed., 2006. (滄海書局) 6. Versteeg, H.K, W. Malalasekera (2007), An Introduction to Computational Fluid Dynamics---The Finite Volume Method. (www.amazon.com), (巨擘) 7. Cebeci, T., Shao, J.P., Kafyeke, T., and Laurendeau, E., “Computational Fluid Dynamics for Engineers”, 2005. (電子書) 8. Tu, J., Liu, C., and Yeoh, G.H., “ Computational Fluid Dynamics: A Practical Approach”, 2008. (電子書) 9. Franke, Jorg, et al. "The COST 732 Best Practice Guideline for CFD simulation of flows in the urban environment: a summary." International Journal of Environment and Pollution 44.1-4 (2011): 419-427. 10. Tominaga, Yoshihide, et al. "AIJ guidelines for practical applications of CFD to pedestrian wind environment around buildings." Journal of wind engineering and industrial aerodynamics 96.10-11 (2008): 1749-1761.
The access to curricular consultation	課程諮詢請來信阮于軒助理教授 yhjuan@ntut.edu.tw Line課程群組 02-27712171 #2065
Expanding teaching and resources
The course corresponds to the SDGs	SDG4：優質教育（Quality Education） SDG7：可負擔的潔淨能源（Affordable and Clean Energy） SDG9：產業創新與基礎設施（Industry, Innovation and Infrastructure） SDG11：永續城市與社區（Sustainable Cities and Communities）
Does the course incorporate AI	● 鼓勵學生使用生成式AI工具（Encourage students to use generative AI tools）
Note	SDGs 4, 7, 11 本學期上課教室位於綜合科館610電腦教室