Course Syllabus

Course Information：

Year-Semester Course Number Course Name Phase Credits Hours Required/Elective Instructor Class Student NO. Withdraw Note

Fall Semester
Year 2025 347443 Mechanical Design 1 3.0 3 ▲ Chun-Ying Lee 4ME3A 66 2 　

Year-Semester	Course Number	Course Name	Phase	Credits	Hours	Required/Elective	Instructor	Class	Student NO.	Withdraw	Note
Fall Semester Year 2025	347443	Mechanical Design	1	3.0	3	▲	Chun-Ying Lee	4ME3A	66	2

Course Plan：

Instructor Chun-Ying Lee　Office Hours

Email leech@ntut.edu.tw

Last Updated 2025-05-27 11:07:02

Course Objective (1) 設計導論、問題求解 (2) 負荷及應力分析 (3) 靜負荷的損壞、動負荷導致的疲勞損壞 (4) 螺紋、扣件及非永久接頭的設計 (5) 熔接、黏合及永久接頭的設計 (6) 機械彈簧 (7) 滾動接觸軸承 (8) 正齒輪及螺旋齒輪 (9) 離合器、剎車、聯軸器及飛輪 (10) 傳動軸與輪軸 (1) Design Introduction, Problem Solving (2) Load and stress analysis (3) Static load damage, fatigue failure due to dynamic load. (4) Design of screw, fasteners and non-permanent joints (5) Welding, bonding, and permanent joints design (6) Mechanical spring (7) Rolling contact bearings (8) Spur gears and helical gears (9) Clutches, Brakes, Couplings, and Flywheels (10) Transmission shaft and wheel shaft.

Course Schedule Part 1 Fundamentals Chapter 1 Mechanical Engineering Design in Broad Perspective (1 week) Chapter 2 Load Analysis Chapter 3 Materials Chapter 4 Static Body Stresses Chapter 5 Elastic strain, Deflection, and Stability (1 week) Chapter 6 Failure Theories, Safety Factors, and Reliability (1 week) Chapter 7 Impact Chapter 8 Fatigue (2 weeks) Chapter 9 Surface Damage Part 2 Applications Chapter 10 Threaded Fasteners and Power Screws (2 weeks) Chapter 11 Rivets, Welding, and Bonding (1 week) Chapter 12 Springs (2 weeks) Chapter 13 Lubrication and Sliding Bearings (2 weeks) Chapter 14 Rolling-Element Bearings (1 week) Chapter 15 Spur Gears (2 weeks) Chapter 16 Helical, Bevel, and Worm Gears Chapter 17 Shafts and Associated Parts (2 weeks) Chapter 18 Clutches and Brakes (1 week)

Evaluation and grading policy 1. 出席與上課參與 10% 2. 期中考1 30% 3. 期中考2 30% 4. 期末考 30%

Materials All right reserved. Do not reproduce without permission.

Foreign-language textbooks:Yes
1. Juvinall's Fundamentals of Machine Component Design 6/e (SI Version), by Robert C. Juvinall, Kurt M. Marshek, John Wiley Pub. Co., 2018 (新月圖書) 2. Shigley's Mechanical Engineering Design 10/e, by Richard Budynas, Keith Nisbett, McGraw-Hill Pub. Co.

The access to curricular consultation 課程助教(實驗室：綜合科館613-B、校內分機4811)或授課教師(研究室:綜合科館613-C、校內分機2070、Email: leech@mail.ntut.edu.tw)

Expanding teaching and resources

The course corresponds to the SDGs SDG4：優質教育（Quality Education）
SDG9：產業創新與基礎設施（Industry, Innovation and Infrastructure）
SDG12：負責任的消費與生產（Responsible Consumption and Production）

Does the course incorporate AI ● 使用生成式AI作為教學過程的輔助工具（Use generative AI tools as an aid to the teaching process）

Note
　

Instructor	Chun-Ying Lee　Office Hours
Email	leech@ntut.edu.tw
Last Updated	2025-05-27 11:07:02
Course Objective	(1) 設計導論、問題求解 (2) 負荷及應力分析 (3) 靜負荷的損壞、動負荷導致的疲勞損壞 (4) 螺紋、扣件及非永久接頭的設計 (5) 熔接、黏合及永久接頭的設計 (6) 機械彈簧 (7) 滾動接觸軸承 (8) 正齒輪及螺旋齒輪 (9) 離合器、剎車、聯軸器及飛輪 (10) 傳動軸與輪軸 (1) Design Introduction, Problem Solving (2) Load and stress analysis (3) Static load damage, fatigue failure due to dynamic load. (4) Design of screw, fasteners and non-permanent joints (5) Welding, bonding, and permanent joints design (6) Mechanical spring (7) Rolling contact bearings (8) Spur gears and helical gears (9) Clutches, Brakes, Couplings, and Flywheels (10) Transmission shaft and wheel shaft.
Course Schedule	Part 1 Fundamentals Chapter 1 Mechanical Engineering Design in Broad Perspective (1 week) Chapter 2 Load Analysis Chapter 3 Materials Chapter 4 Static Body Stresses Chapter 5 Elastic strain, Deflection, and Stability (1 week) Chapter 6 Failure Theories, Safety Factors, and Reliability (1 week) Chapter 7 Impact Chapter 8 Fatigue (2 weeks) Chapter 9 Surface Damage Part 2 Applications Chapter 10 Threaded Fasteners and Power Screws (2 weeks) Chapter 11 Rivets, Welding, and Bonding (1 week) Chapter 12 Springs (2 weeks) Chapter 13 Lubrication and Sliding Bearings (2 weeks) Chapter 14 Rolling-Element Bearings (1 week) Chapter 15 Spur Gears (2 weeks) Chapter 16 Helical, Bevel, and Worm Gears Chapter 17 Shafts and Associated Parts (2 weeks) Chapter 18 Clutches and Brakes (1 week)
Evaluation and grading policy	1. 出席與上課參與 10% 2. 期中考1 30% 3. 期中考2 30% 4. 期末考 30%
Materials	All right reserved. Do not reproduce without permission. Foreign-language textbooks:Yes 1. Juvinall's Fundamentals of Machine Component Design 6/e (SI Version), by Robert C. Juvinall, Kurt M. Marshek, John Wiley Pub. Co., 2018 (新月圖書) 2. Shigley's Mechanical Engineering Design 10/e, by Richard Budynas, Keith Nisbett, McGraw-Hill Pub. Co.
The access to curricular consultation	課程助教(實驗室：綜合科館613-B、校內分機4811)或授課教師(研究室:綜合科館613-C、校內分機2070、Email: leech@mail.ntut.edu.tw)
Expanding teaching and resources
The course corresponds to the SDGs	SDG4：優質教育（Quality Education） SDG9：產業創新與基礎設施（Industry, Innovation and Infrastructure） SDG12：負責任的消費與生產（Responsible Consumption and Production）
Does the course incorporate AI	● 使用生成式AI作為教學過程的輔助工具（Use generative AI tools as an aid to the teaching process）
Note